EVBMW

EVBMW
Show:
Sort By:
Tesla Gen 2 Charger Logic Board

Logic board bare unpopulated PCB for the Tesla GEN2 onboard battery charger. Price includes worldwide tracked postage. Software and resources available on Github: https://github.com/damienmaguire/Tesla-Charger Charger running at full power : https://www.youtube.com/watch?v=bPLqXCiArVM This is A BARE PCB WITH NO COMPONENTS OR SUPPORT. Requires electronics and SMD soldering skills.

50.00€ Ex Tax: 50.00€

Tesla Large Drive Unit Bare Logic Board

Logic board bare unpopulated PCB for the Tesla Large Drive Unit. Price includes worldwide tracked postage. Software and resources available on Github: https://github.com/damienmaguire/Tesla-Drive-Unit This is A BARE PCB WITH NO COMPONENTS OR SUPPORT. Requires electronics and SMD soldering skills.

50.00€ Ex Tax: 50.00€

Tesla Small Drive Unit Bare Logic Board

Logic board bare unpopulated PCB for the Tesla Small Drive Units.
Fits both front and rear small drive units.
Price includes worldwide tracked postage.
Software and resources available on Github:
https://github.com/damienmaguire/Tesla-Front-Drive-Unit
This is A BARE PCB WITH NO COMPONENTS OR SUPPORT.
Requires electronics and SMD soldering skills.


Motorsport proven : https://www.youtube.com/watch?v=mhGwcPWCbsA

60.00€ Ex Tax: 60.00€

Combi Inverter Board Bare PCB

Unpopulated PCB for the Enova AC motor inverter. Based on the Heubner open source inverter. This board was designed to run the Enova inverter as found in the Smith Edison vans. Price includes worldwide tracked postage. Software and resources available on Github: https://github.com/damienmaguire/Inverter Fitting video : https://www.youtube.com/watch?v=rUeR3SNItUw This is A BARE PCB WITH NO COMPONENTS OR SUPPORT. Requires electronics and SMD soldering skills.

50.00€ Ex Tax: 50.00€

Tesla Large Drive Unit Logic Board Partially Built

Logic board PCB for the Tesla Large Drive Unit with STM32 microprocessor and RS232 Transciever fitted. In order to help people get access to these boards at a lower cost I am offering the bare PCB with some of the most difficult to place SMD components pre fitted. Price includes worldwide tracked postage. Software and resources available on Github: https://github.com/damienmaguire/Tesla-Drive-Unit Requires electronics and SMD soldering skills. NO RETURNS AND NO REFUNDS.

120.00€ Ex Tax: 120.00€

Tesla Small Drive Unit Bare Logic Board Partially Built

Logic board PCB for the Tesla Small Drive Unit with STM32 microprocessor and RS232 Transciever fitted.
In order to help people get access to these boards at a lower cost I am offering the bare PCB with some of the most difficult to place SMD components pre fitted.
Fits both front and rear small drive units.
Price includes worldwide tracked postage.
Software and resources available on Github:
https://github.com/damienmaguire/Tesla-Front-Drive-Unit
Motorsport proven : https://www.youtube.com/watch?v=mhGwcPWCbsA


Requires electronics and SMD soldering skills. NO RETURNS AND NO REFUNDS.

130.00€ Ex Tax: 130.00€

Tesla Gen 2 Charger Logic Board Partially Built

Logic board partially built PCB for the Tesla GEN2 onboard battery charger. In order to help people get access to these boards at a lower cost I am offering the bare PCB with some of the most difficult to place SMD components pre fitted. Price includes worldwide tracked postage. Software and resources available on Github: https://github.com/damienmaguire/Tesla-Charger Charger running at full power : https://www.youtube.com/watch?v=bPLqXCiArVM Requires electronics and SMD soldering skills. NO RETURNS AND NO REFUNDS.

120.00€ Ex Tax: 120.00€

Tesla Large Drive Unit Logic Board Built and Tested

Logic board PCB for the Tesla Large Drive Unit fully built and tested.
Designed to fit the Tesla Large Rear Drive Unit.
Both standard and performance versions.
Will also fit the Mercedes B class electric drive unit although some modification to the external connector is required.
Price includes worldwide tracked postage and WiFi adapter.
Support via the openinverter.org forum.
https://openinverter.org/forum/
Fully open source project.
Software and resources available on Github:
https://github.com/damienmaguire/Tesla-Drive-Unit
Video Series showing the prototype in testing : https://www.youtube.com/watch?v=HFg15QyVMgg

500.00€ Ex Tax: 500.00€

Tesla Small Drive Unit Logic Board Built and Tested

Logic board PCB for the Tesla Small Drive Unit fully built and tested.
Fits both front and rear small drive units.
Price includes worldwide tracked postage and WiFi adapter.
Fully open source project.
Support via the openinverter.org forum.
https://openinverter.org/forum/
Software and resources available on Github:
https://github.com/damienmaguire/Tesla-Front-Drive-Unit
Motorsport proven :
https://www.youtube.com/watch?v=mhGwcPWCbsA

500.00€ Ex Tax: 500.00€

Tesla Gen 2 Charger Logic Board Fully Built and Tested

Logic board fully built and tested for the Tesla GEN2 onboard battery charger.
Fits all GEN2 chargers both master and slave.
Price includes worldwide tracked postage.
Fully open source project.
Support via the openinverter.org forum.
https://openinverter.org/forum/
Software and resources available on Github:
https://github.com/damienmaguire/Tesla-Charger Charger running at full power :
https://www.youtube.com/watch?v=bPLqXCiArVM

350.00€ Ex Tax: 350.00€

IGBT Driver Boards

IGBT driver boards designed around the excellent HCPL-337j IC. Designed to drive one half bridge module up to 600V 600A Ideal for diy inverter projects. Resources on Github : https://github.com/damienmaguire/Inverter Quantity of 3 pieces. Price includes worldwide tracked postage. This is A BARE PCB WITH NO COMPONENTS OR SUPPORT. Requires electronics and SMD soldering skills.

50.00€ Ex Tax: 50.00€

DC Controller IGBT Driver Bare Board

Bare unpopulated PCB designed to drive two parallel 600v 600a igbt modules. Specifically designed for the Hitachi MBM600GS6CW module but can be adapted to others. Price includes worldwide tracked postage. Resources available on Github: https://github.com/damienmaguire/DC-Motor-Controller Assembly video for DIY DC motor controller : https://www.youtube.com/watch?v=IzVR4jD0N4w This is A BARE PCB WITH NO COMPONENTS OR SUPPORT. Requires electronics and soldering skills.

25.00€ Ex Tax: 25.00€

DC Controller Logic Board V1

Bare unpopulated PCB designed to create an 8khz pwm for driving an electric vehicle DC motor via an appropriate power stage. Specifically designed for the DC igbt driver board also for sale here but can be used with others. Price includes worldwide tracked postage. Resources available on Github: https://github.com/damienmaguire/DC-Motor-Controller Video of first testing : https://www.youtube.com/watch?v=bzfdMME4o-Q This is A BARE PCB WITH NO COMPONENTS OR SUPPORT. Requires electronics and soldering skills.

30.00€ Ex Tax: 30.00€

Single Email

Basic option where you can send one email with a maximum of 3 questions or topics. Response within 24 hours. Follow up communication at our discretion.

10.00€ Ex Tax: 10.00€

Voice/Video 1

30 Minute Support via voice or video services such as Skype. Arranged within 24 hours. Subject to normal working hours and Irish time zone. Follow up communication at our discretion.

60.00€ Ex Tax: 60.00€